A DVD+R disc is a recordable DVD disc that uses the DVD+R recording format. It can hold up to 4.7GB of data or approximately 120 minutes of video. A DVD+R disc is capable of being played in most DVD players and can also be played in some CD players.
The DVD+R format was developed by Sony and Philips and was introduced in 1997. The format was initially used for data storage, but later evolved into a format for recording video.
The DVD+R disc has a diameter of 120mm and a thickness of 1.2mm. It can be written to using a DVD+R recorder or a DVD+RW recorder.
A DVD+R disc is usually packaged in a jewel case. It can also be packaged in a slimline case or a cake box.
Contents
What does the +R mean on a DVD?
What does the “R” mean on a DVD?
The “R” in DVD stands for “region.” The “R” on a DVD means that it is a region-coded disc and can only be played in devices that are set to the same region. For example, a DVD with a region code of “1” can only be played in devices that are set to region 1.
There are six different regions for DVDs:
Region 1 – United States, Canada, Bermuda, and U.S. Territories
Region 2 – Japan, Europe, South Africa, and the Middle East
Region 3 – Southeast Asia and Taiwan
Region 4 – Australia, New Zealand, Central and South America
Region 5 – Eastern Europe, Russia, India, Africa, and North Korea
Region 6 – China
Can you put more than 120 minutes DVD-R?
There is no hard and fast rule that states you can only put 120 minutes of data on a DVD-R disc. However, if you exceed the recommended limit, there is a good chance the disc will not play back in all DVD players.
The reason for this is that DVD-R discs are designed to be able to hold up to 120 minutes of data, which is the approximate length of a feature-length movie. If you put more than 120 minutes of data on a DVD-R disc, the player may not be able to read all of the information stored on the disc, which could cause the disc to not play back properly.
While it is possible to put more than 120 minutes of data on a DVD-R disc, it is not recommended. If you do exceed the recommended limit, be sure to test the disc in a few different DVD players to make sure it will play back correctly in all of them.
What is the difference between DVD+R and DVD-R?
There are a few key distinctions between DVD+R and DVD-R discs. The most obvious is that DVD+R discs are compatible with more devices, while DVD-R discs are more compatible with certain software. Additionally, DVD+R discs offer a longer lifespan and tend to be more reliable.
What is the largest capacity DVD-R?
What is the largest capacity DVD-R?
There are currently four different types of DVD-R discs available on the market. They are 4.7GB, 8.5GB, 17GB, and 25GB. The 4.7GB and 8.5GB discs are both single-layer discs, while the 17GB and 25GB discs are dual-layer discs.
Do all DVD players play DVD-R?
Do all DVD players play DVD-R?
This is a question that is asked frequently, and the answer is not a simple one. In general, most DVD players will play DVD-R discs. However, there are a few exceptions. Some older DVD players may not be able to play DVD-R discs, and some DVD players that are manufactured in Asia may not be able to play them either.
If you are not sure whether or not your DVD player can play DVD-R discs, you can check the player’s manual or manufacturer’s website. If your DVD player cannot play DVD-R discs, you may be able to purchase a DVD-R compatible player for a relatively low price.
What DVD is best for burning movies?
When it comes to burning movies to DVD, there are a few things to consider. What DVD format should you use? What software should you use? What type of DVD should you use? In this article, we’ll take a look at each of these questions and help you choose the best DVD for burning your movies.
The first thing you need to decide is what DVD format to use. There are three main formats: DVD-R, DVD-RW, and DVD+R. DVD-R is a one-time-use format, DVD-RW can be used multiple times, and DVD+R is a more expensive, but higher-quality, format.
The second thing you need to decide is what software to use. There are many different software programs available, but the most popular are Nero and Roxio.
The third thing you need to decide is what type of DVD to use. There are three types of DVDs: DVD-5, DVD-9, and DVD-10. DVD-5 is a single-layer DVD that can hold up to 4.7GB of data, DVD-9 is a dual-layer DVD that can hold up to 8.5GB of data, and DVD-10 is a triple-layer DVD that can hold up to 10.8GB of data.
So, which DVD is best for burning movies? The answer depends on what type of DVD you want to use. If you want a single-layer DVD that can hold up to 4.7GB of data, then the DVD-5 format is best. If you want a dual-layer DVD that can hold up to 8.5GB of data, then the DVD-9 format is best. And if you want a triple-layer DVD that can hold up to 10.8GB of data, then the DVD-10 format is best.
How can I burn more than 2 hours of a DVD?
DVDs typically hold up to 2 hours of video content. However, there are ways to burn more content to a DVD. This article will explain two methods for burning more than 2 hours of video content to a DVD.
One way to burn more than 2 hours of video content to a DVD is to create a DVD with multiple video files. To do this, you will need to create a DVD folder structure that mirrors the structure of the DVD you want to create. For example, if you want to create a DVD with 3 video files, you will need to create a DVD folder structure that looks like this:
VIDEO_TS
VIDEO_TS
VIDEO_TS
The “VIDEO_TS” folder is where the video files will be stored. Once you have created the DVD folder structure, you will need to create a text file called “VIDEO_TS.IFO.” This file will tell the DVD player how to play the DVD. The “VIDEO_TS.IFO” file should look like this:
VIDEO_TS.IFO
Directory
File
The “Directory” line tells the DVD player where to find the “VIDEO_TS” folder. The “File” line tells the DVD player which video file to play. You can create a text file for each video file that you want to include on the DVD.
Once you have created the “VIDEO_TS.IFO” file, you will need to create a DVD image. To do this, you will need to download a software called “ImgBurn.” Once you have downloaded and installed “ImgBurn,” open the software and click on the “Create Image” button.
In the “Create Image” window, select “DVD” from the “Image Type” drop-down menu.
Next, select the “Browse” button and locate the “VIDEO_TS” folder.
Click on the “Create Image” button and the software will create a DVD image file.
You will now need to burn the DVD image to a blank DVD. To do this, open the “ImgBurn” software and click on the “Burn” button.
In the “Burn” window, click on the “Browse” button and locate the DVD image file.
Click on the “Start” button and the software will start burning the DVD.
The other way to burn more than 2 hours of video content to a DVD is to use a DVD authoring program. DVD authoring programs allow you to create a DVD menu and add additional video files to the DVD.
One popular DVD authoring program is “Nero.” Nero allows you to create a DVD menu, add video files, and create chapters.
To create a DVD with Nero, you will first need to create a project. To do this, open Nero and click on the “New Project” button.
In the “New Project” window, select “DVD” from the “Project Type” drop-down menu.
Next, enter a name for the project and select the “Browse” button. Locate the “VIDEO_TS” folder and click on the “Open” button.
The “VIDEO_TS” folder will be added to the project.
Next, you will need to add a DVD menu. To do this, click on the “Menu” tab and select “New.”
In the “New Menu” window, enter a name for the menu and select the “Browse” button. Locate the “VIDEO_TS” folder and click on the “Open” button.
