A hard reset, also known as a factory reset, is the restoration of a device to its original factory settings. This process deletes all user data and restores the device to its original condition.
There are two ways to hard reset an imac computer. The first way is to use the imac’s recovery mode. To do this, hold down the Command and R keys while the computer is booting. Keep them held down until the Apple logo appears. Then, release them and click the Restore button that appears.
The second way to hard reset an imac is to use the keyboard. Shut down the computer and unplug it. Then, press and hold the power button for five seconds. Release it and press and hold the Command, Option, P, and R keys at the same time. Keep them held down until the computer starts up again and displays a grey screen. Then, release them and click the Restore button that appears.
Contents
- 1 How do I wipe my iMac and start over?
- 2 How do I reset my iMac to factory settings Mac?
- 3 How do you reset a Mac computer to factory settings?
- 4 How do I factory reset my Mac unresponsive?
- 5 How do I reset my iMac to factory settings without password?
- 6 How do I factory reset my iMac 2012?
- 7 How do you unlock an Apple computer without the password?
How do I wipe my iMac and start over?
If you’re considering wiping your iMac and starting over, you’re likely not the only one. Many users find themselves in need of a fresh start at some point, and a wipe and reinstallation of macOS is one way to achieve that.
In this article, we’ll walk you through the steps necessary to wipe your iMac and start over. We’ll also discuss some of the things you should keep in mind before you do so.
First, let’s take a look at what you’ll need to do in order to wipe your iMac.
How to wipe your iMac
There are a few ways to wipe your iMac, but the easiest is to use the built-in “Reinstall macOS” tool. Here are the steps:
1. Shut down your iMac and disconnect all external devices.
2. Boot your iMac into Recovery Mode.
3. Click on “Reinstall macOS” and follow the on-screen instructions.
4. When the process is finished, your iMac will be wiped and you’ll be able to start over with a fresh installation of macOS.
Keep in mind that wiping your iMac will erase all of your data, so be sure to back it up beforehand.
Things to keep in mind before wiping your iMac
There are a few things to keep in mind before wiping your iMac. First, be sure to back up your data, as mentioned above.
Second, if you have any important files or programs that you need to keep, you’ll need to copy them to an external drive or cloud storage before wiping your iMac.
Third, if you’re using a third-party app to wipe your iMac, be sure to follow the app’s instructions carefully. Otherwise, you could end up deleting important files or causing other damage.
Finally, if you’re using a beta version of macOS, be aware that wiping your iMac will erase that version and you’ll need to reinstall it.
Wiping your iMac and starting over can be a great way to clean up your computer and get a fresh start. Just be sure to back up your data first and to follow the instructions carefully.
How do I reset my iMac to factory settings Mac?
Resetting your iMac to factory settings will erase all of your data and restore the computer to its original condition. This process is useful if you are selling your iMac, or if you are experiencing problems with the computer and need to start over.
To reset your iMac to factory settings, you will need to erase the drive and reinstall macOS. First, make sure you have a copy of macOS installed on an external drive or on a secondary partition of your hard drive. If you do not have a copy of macOS, you can download it from the App Store.
Once you have a copy of macOS, you will need to erase the drive. To do this, open the Applications folder and launch the Disk Utility app. Select your hard drive in the list on the left side of the window, then click the Erase tab. In the Format menu, select Mac OS Extended (Journaled), then click Erase.
When the drive has been erased, you can reinstall macOS. To do this, open the Applications folder and launch the Install macOS app. Click Continue, then select the drive you just erased. Click Install, then enter your Apple ID and password when prompted.
macOS will install on the drive and your iMac will be reset to factory settings.
How do you reset a Mac computer to factory settings?
Resetting your Mac to its factory settings is a great way to start fresh and clear out any old files or programs that you no longer need. This process will erase all of the data on your computer and restore it to its original state.
To reset your Mac to factory settings, you will need to first make sure that you have a copy of the Mac OS X installation disc. If you do not have a copy of the installation disc, you can purchase one from the Apple website.
Once you have the installation disc, insert it into your Mac’s optical drive and restart your computer. Once your computer has restarted, you will see the Apple logo on the screen. When you see the logo, press and hold down the C key on your keyboard. This will launch the Mac OS X installation disc.
Once the installation disc has loaded, you will see a menu bar at the top of the screen. Click on the Utilities menu and then select the Disk Utility option.
In the Disk Utility window, select your Mac’s hard drive from the list on the left-hand side of the window. Then, click on the Erase tab in the middle of the window.
In the Erase tab, make sure that the Format menu is set to Mac OS Extended (Journaled). Then, click on the Erase button.
This will erase all of the data on your Mac’s hard drive. Once the hard drive has been erased, you can restart your computer and reinstall the Mac OS X operating system.
How do I factory reset my Mac unresponsive?
A factory reset is a process that restores a device to its original factory settings. This process can be used to fix various issues with a device, such as a Mac that is unresponsive.
There are a few ways to factory reset a Mac. The first way is to use the Apple menu. To do this, hold down the Command and R keys on your keyboard while your Mac is booting up. Once you see the Apple logo, release the keys and wait for your Mac to finish resetting.
The second way to factory reset a Mac is to use the Recovery HD. To do this, restart your Mac and hold down the Command and R keys until you see the Recovery HD screen. Then, select the “Restore” option and follow the on-screen instructions.
The third way to factory reset a Mac is to use the Terminal. To do this, restart your Mac and hold down the Command and S keys until you see the Terminal screen. Then, type the following command and press Enter:
“sudo resetpassword”
Enter your password and press Enter. Then, type the following command and press Enter:
“sudo resetcomputer”
Your Mac will reset to its original factory settings.
How do I reset my iMac to factory settings without password?
There are a few ways that you can reset your iMac to factory settings without a password. One way is to use the Terminal app. You can also use a recovery partition on your hard drive or an external startup disk.
If you have a recovery partition on your hard drive, you can reset your iMac to factory settings by following these steps:
1. Shut down your iMac.
2. Press and hold the Command and R keys to start up your iMac.
3. When the Apple logo appears, release the keys.
4. Select the language you want to use.
5. Select the Utilities menu.
6. Select the Reset Password utility.
7. Enter your administrator password.
8. Select the Reset button.
9. Select the Erase button.
10. Confirm that you want to erase your iMac.
If you don’t have a recovery partition on your hard drive, you can reset your iMac to factory settings by using an external startup disk. To do this, you’ll need to create a startup disk that contains the macOS Recovery software. To create a startup disk, follow these steps:
1. Open System Preferences.
2. Click the Startup Disk icon.
3. Select the Options button.
4. Select the Create Startup Disk… button.
5. Select the USB drive you want to use.
6. Click the Create button.
7. Click the Close button.
Once you have created a startup disk, you can reset your iMac to factory settings by following these steps:
1. Shut down your iMac.
2. Connect the USB drive to your iMac.
3. Press and hold the Option key.
4. Press the Power button.
5. Select the USB drive from the list of bootable devices.
6. Select the Utilities menu.
7. Select the Reset Password utility.
8. Enter your administrator password.
9. Select the Reset button.
10. Select the Erase button.
11. Confirm that you want to erase your iMac.
How do I factory reset my iMac 2012?
There may come a time when you need to factory reset your iMac 2012. Perhaps you want to sell it or give it to someone else and you want to erase all of your data first. Or maybe your iMac is running slowly and a factory reset could fix the problem.
No matter the reason, here’s how to factory reset your iMac 2012:
1. Shut down your iMac and unplug it from the power outlet.
2. Plug in your iMac’s power cord and wait for it to power on.
3. Hold down the Command and R keys on your keyboard until the Apple logo appears.
4. When the Recovery menu appears, click on the “Restart” button.
5. Once your iMac has restarted, click on the “Disk Utility” option.
6. In the Disk Utility window, select your iMac’s hard drive from the list on the left.
7. Click on the “Erase” button.
8. In the Erase window, set the “Format” to “Mac OS Extended (Journaled)”.
9. Click on the “Erase” button.
10. Once the hard drive has been erased, click on the “Reinstall OS X” option.
11. Follow the on-screen instructions to reinstall OS X.
12. When the OS X installation is complete, your iMac will restart.
13. Once your iMac has restarted, set up your account and start using it like normal.
How do you unlock an Apple computer without the password?
If you have forgotten the password to your Apple computer, there are a few ways to unlock it without the password. The first way is to use the recovery key. To do this, you will need to have created a recovery key when you set up your computer. If you have not created a recovery key, you can create one by following these steps:
1. Open System Preferences and click on the “Security & Privacy” icon.
2. Click on the “FileVault” tab.
3. Click on the “Create a recovery key” button.
4. Make sure to write down the recovery key and store it in a safe place.
If you have forgotten your password, you can also use the recovery system to unlock your computer. To do this, you will need to have a USB drive with the recovery system installed on it. To install the recovery system, follow these steps:
1. Open System Preferences and click on the “Startup Disk” icon.
2. Click on the “Restart” button.
3. Hold down the “Command” (⌘) and “R” keys on your keyboard.
4. Select the USB drive from the list of bootable disks.
5. Click on the “Restart” button.
Your computer will restart and the recovery system will be installed on your USB drive. To use the recovery system to unlock your computer, follow these steps:
1. Turn off your computer.
2. Connect the USB drive to your computer.
3. Turn on your computer.
4. Hold down the “Command” (⌘) and “Option” (⌥) keys on your keyboard.
5. Select the USB drive from the list of bootable disks.
6. Click on the “Startup Disk” button.
7. Select “Macintosh HD” and click on the “Restart” button.
Your computer will restart and the recovery system will be loaded. You can then use the recovery system to unlock your computer.
