Rca Universal Remote Codes For Sony Dvd Player

If you have an RCA universal remote and you want to use it to control your Sony DVD player, you’ll need to find the appropriate codes. There are several codes that may work, so you’ll want to try each one to see which one works best for your setup.

The first code to try is 01685. If that code doesn’t work, you can try 01686, 01687, 01688, or 01689.

If none of those codes work, you can try the following codes: 01664, 01665, 01666, 01667, 01668, 01669, 01670, 01671, 01672, 01673, 01674, or 01675.

Finally, if none of the codes above work, you can try the following code: 01676.

How do I program my RCA universal remote to my Sony DVD player?

Programming an RCA universal remote to a Sony DVD player can be a little confusing, but with these instructions it can be done in just a few minutes.

First, find the code for your Sony DVD player. There are many codes to choose from, so be sure to find the right one. Once you have the code, locate the Setup button on your RCA remote. Press and hold the Setup button until the light on the remote turns on. Then, use the number buttons on the remote to enter the code.

Next, find the DVD button on your remote. Press and hold the DVD button until the light on the remote turns on. Now, use the arrow buttons to navigate to the Sony DVD player. Once the player is highlighted, release the DVD button. Finally, press the Power button to turn on the DVD player.

What is the code for a universal remote to a Sony DVD player?

A Sony DVD player is a type of DVD player manufactured by Sony. DVD players play DVDs, which are optical discs that can store up to 4.7 gigabytes of data or about two hours of video. Most DVD players include a built-in tuner that allows them to receive digital television (DTV) broadcasts.

There are many different types of Sony DVD players on the market, so it is important to know the code for your specific model in order to program a universal remote to control it. The code for a universal remote to a Sony DVD player will be different depending on the model of Sony DVD player.

Some popular Sony DVD player models include the Sony BDP-S3200, Sony BDP-S5200, Sony BDP-S5500, Sony BDP-S6500, Sony BDP-S6700, and Sony BDP-S7200. If you are not sure which model of Sony DVD player you have, you can find the model number on the back of the player.

To find the code for a universal remote to a Sony DVD player, you will need to consult the user manual for your specific model of DVD player. The code will be listed in the manual under the heading “Programming the Remote.”

Once you have found the code for your model of Sony DVD player, you can program your universal remote to control it. Programming a universal remote to control a Sony DVD player is a relatively simple process that can usually be done in a matter of minutes.

If you need help programming your universal remote to control your Sony DVD player, consult the user manual for your specific model of remote or contact the manufacturer of the remote for assistance.

Can a universal remote work on a Sony DVD player?

Can a universal remote work on a Sony DVD player?

Yes, a universal remote can work on a Sony DVD player. However, the functionality of the remote may be limited, as not all universal remotes are created equal. It is important to check the compatibility of the remote with the DVD player before making a purchase.

How do I program my Sony DVD player remote?

Programming the remote control for your Sony DVD player is a very easy process. In just a few minutes, you can have the remote working perfectly with your DVD player. 

The first step is to locate the remote control codes for your Sony DVD player. You can find these codes in the manual that came with your DVD player, or you can find them online. Once you have the codes, you can begin the programming process.

To program the remote, you will need to locate the code for your DVD player and the code for your TV. You can find these codes in the manual that came with your devices, or you can find them online. Once you have the codes, you can begin the programming process.

The first step is to turn on your TV and DVD player. Once they are both on, press and hold the POWER button on the remote control. While you are holding the POWER button, enter the code for your TV. Once you have entered the code, release the POWER button.

Next, press and hold the DVD button on the remote control. While you are holding the DVD button, enter the code for your DVD player. Once you have entered the code, release the DVD button.

Your remote control is now programmed and should work perfectly with your Sony DVD player and TV.

How do you program a universal remote to a DVD player without a code?

Programming a universal remote to control a DVD player without a code is a relatively simple process. First, locate the DVD player’s brand and model number. Once you have this information, you can look up the code for the DVD player on the universal remote’s manufacturer’s website. Next, enter the code into the universal remote and test it to make sure that it works. If it does not, you may need to try a few different codes until you find the one that works.

How do I program my RCA universal remote without a code?

Programming an RCA universal remote without a code is a process that can be completed in a few simple steps. First, locate the brand of the device that you want to control. Next, find the code for that brand. Then, enter the code into the universal remote. Finally, test the remote to make sure it is working properly.

To locate the brand of the device that you want to control, look for the logo on the device. There are many different brands that are compatible with RCA universal remotes, including Samsung, Panasonic, Vizio, and Philips. Once you have located the brand, find the code for that brand. codes can be found in the user manual for the universal remote, or they can be found online.

Once you have located the code, enter it into the universal remote. The code will be entered into a sequence of buttons that are specific to the brand of the remote. For example, the code for Samsung might be entered by pressing the “TV” button, then the “Mute” button, then the “Enter” button.

Finally, test the remote to make sure it is working properly. Turn on the device that you want to control and press the “Power” button on the universal remote. If the device turns on, then the remote is working properly.

What are the codes for a Sony Blu Ray DVD player?

A Sony Blu-ray DVD player uses an infrared remote control to operate. The code list for a Sony Blu-ray DVD player is as follows:

1. POWER: Turns the player on or off.

2. OPEN/CLOSE: Opens or closes the disc tray.

3. ZOOM: Zooms in or out on the video image.

4. STOP: Stops playback.

5. PLAY: Starts or resumes playback.

6. PAUSE: Pauses playback.

7. FFWD: Fast-forwards the video.

8. REW: Rewinds the video.

9. NUMBER PAD: Enters numbers into the player.

10. MUTE: Turns the sound off or on.

11. VOLUME +/-: Controls the volume.

12. TV/VIDEO: Switches between the TV and video input modes.

13. DISPLAY: Shows information about the current video.

14. ANGLE: Switches between different camera angles during playback.

15. SUBTITLE: Turns subtitles on or off.

16. RETURN: Returns to the previous menu or selection.

17. TOP MENU: Returns to the main menu.